Astm D4318 docs

Searching:
Download
Astm D4318 - Fast Download

Download Astm D4318 from our fatest mirror

Sec 6.1: Cement Stabilized Sand Backfill - Dallas

1050 dl's @ 5793 KB/s

doc
Sec 6.1: Cement Stabilized Sand Backfill - Dallas

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures. Submittals. Mix design shall be submitted to the Owner for approval.

http://www.dallascityhall.com/dwu/word/6.1_CementStabilizedSandBackfil_aug2011.doc

Date added: January 31, 2012 - Views: 36

doc
PROJECT MANUAL - United States Department of Veterans Affairs

ASTM D4318 Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils . 1.3 . DENSITY CONTROL TESTING . A. Field Density Testing . Meet the quality control and quality assurance testing requirements in Section 01400, Contractor Quality Control and Owner Quality Assurance.

https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=228298&FileName=VA-259-11-RP-0190-501.DOCX

Date added: February 11, 2012 - Views: 31

doc
ASTM STANDARDS REFERENCED IN THE NRC REGULATORY GUIDES

D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of. Soils. ... General Reference to ASTM Concrete Standards. 1.143 Design Guidance for Radioactive Waste Management Systems, Structures, ...

http://www.astm.org/portals/files/NRC_REGULATORY_GUIDES.doc

Date added: September 10, 2012 - Views: 166

doc
Download - Alpha -Omega Geotech, Inc.

Atterberg limits (ASTM D4318) Consolidated-Undrained with Pore Pressures (ASTM D4767) Sieve analyses (ASTM D422) Unconsolidated-Undrained (ASTM D2850) Hydrometer analyses (ASTM D422) Direct shear – Consolidated, Drained (ASTM D3080)

http://www.aogeotech.com/downloads/servicecapabilities.doc

Date added: September 19, 2011 - Views: 86

doc
SECTION 16130 - American Water

Material passing number 40 sieve shall meet the following requirements when tested in accordance with ASTM D4318: Plasticity index: not exceeding 7. Concrete Sand: Natural sand, manufactured sand, ...

http://www.amwater.com/files/31%2023%2023%20-%20Utility%20Backfill%20Materials.doc

Date added: July 25, 2013 - Views: 5

doc
Encapco Technologies will be pleased to provide a preliminary ...

... (ASTM D4318), plasticity index (ASTM D4318) and moisture curve (ASTM D698). If such tests have not been completed, please describe the condition of the soils in your words and estimate the soil class using the Soil Classification information at http://www.encapco.com/Soil%20Classification ...

http://www.encapco.com/Encapco%20Assessment%20Request.doc

Date added: August 9, 2013 - Views: 1

doc
To apply for A2LA accreditation under the geotechnical field ...

ASTM D4318 Liquid Limit, Plastic Limits and Plasticity Index of Soils. ASTM D4643 Determination of Water (Moisture) Content of Soil by the Microwave Oven Method. ASTM D4959 Determination of Water (Moisture) Content of Soil by the Direct Heating Method.

http://www.a2la.org/selectionlists/Geotechnical_Selection_List.DOC

Date added: May 12, 2012 - Views: 27

doc
Instructions for Testing and Reporting - AMRL

All tests should be conducted on each of the two samples according to the AASHTO or ASTM methods indicated. Report the results of a single determination only, ... Plastic Limit of Soils T90-00 or D4318-10: Determine the plastic limit and report the results to the nearest 0.1 percent.

http://www.amrl.net/amrlsitefinity/publicdocs/pspdatasheets/SOIL%20INSTRUCTIONS%20167-168.doc

Date added: May 3, 2013 - Views: 12

doc
SPECIFICATIONS - Stone Strong Systems

D. ASTM D4318 - Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils (AASHTO T89 & T90) E. ASTM D698 - Standard Test Method for Laboratory Compaction Characteristics of Soil Using Standard Effort (AASHTO T99)

http://www.stonestrong.com/downloads/specifications-11-5-13.doc

Date added: December 11, 2013 - Views: 9

doc
03/2002 - EP Henry

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils [Last Update: 00] 12. ASTM D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method [Last Update: 86 (2001)] 13 ...

http://www.ephenry.com/download-file.ashx?url=%2fmedia%2fhow-tos%2fDiamond+Pro+Specification.doc

Date added: May 8, 2013 - Views: 7

doc
CHAPTER 31F - California State Lands Commission

3.The plasticity index, PI, and the moisture content shall be determined in accordance with ASTM D4318 [6.1] and ASTM D2216 [6.2], respectively. (see Table 31F- 6-1).

http://www.slc.ca.gov/Division_Pages/MFD/MOTEMS/Section3106F.doc

Date added: January 27, 2012 - Views: 17

doc
Supplemental Boring Request Form

... (ASTM D4318) - 4 Atterberg Limits 1 Atterberg Limits 2 Atterberg Limits 3 Atterberg Limits 4 Organic Content Tests (ASTM D2974) - 4 Organic content 1 Organic content 2 Organic content 3 Organic content 4 Point Load Strength Index of Rock Core (ASTM D5731) - 1 Strength Index Test ...

http://www.maine.gov/mdot/martinspointbridgedb/documents/MPBsuppementalboringrequestform.doc

Date added: April 12, 2013 - Views: 7

doc
SOIL WORKSHEET INDEX - Laboratory Accreditation Bureau

(ASTM D4318) _____ APPARATUS. Porcelain dish, or similar mixing dish, about 115 mm in diameter? _____ Spatula or pill knife, about 75 to 100 mm (ASTM: 10 to 13 cm) long and 20 mm wide? _____ Rolling surface: AASHTO: Ground glass plate or smooth unglazed paper? _____

http://www.l-a-b.com/files/File/CMT/Revised%20-%20Form%20411.2%20-%20Soil%20Checklist%20-%20Rev%201%20-%202-28-11.doc

Date added: October 23, 2013 - Views: 37

doc
03/2002 - Oneonta Block Company

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D4491 Standard Test Method for Water Permeability of Geotextiles by the Permittivity Method

http://www.oneontablock.com/DPROSPEC.doc

Date added: April 12, 2012 - Views: 9

doc
ELECTROCHEMICAL PRESSURE INJECTION - Hayward Baker

ASTM D4318 Atterberg Limits. ASTM D4546 Method ‘B’ Swell. 1.4 DEFINITIONS. A. Electrochemical Injection. The electrochemical pressure injection process consists of pumping an ion. exchange medium into the soil through the use of an injection pipe, ...

http://www.haywardbaker.com/WhatWeDo/Techniques/GroundImprovement/InjectionSystemsForExpansiveSoils/Specifications/Downloads_GetFile.aspx?id=3083

Date added: April 2, 2014 - Views: 1

doc
Instructions for Testing and Reporting - AMRL

Plastic Limit of Soils T90-00 or D4318-10: Determine the plastic limit and report the results to the nearest 0.1 percent. ... Since ASTM D427 Shrinkage Factors of Soils using the Mercury Method was withdrawn as an active standard, ASTM D4943 is offered as another (but not equivalent) method for ...

http://www.amrl.net/AmrlSitefinity/publicdocs/pspdatasheets/SOIL%20INST%20165-166.doc

Date added: April 26, 2012 - Views: 16

doc
ATB02704 - Aggregates and Granular Materials - ftp.nirb.ca - /

aggregate produced PLASTICITY INDEX ASTM D4318 One per source LIQUID LIMIT ASTM D4318 One per source Note 1: The ...

http://ftp.nirb.ca/01-SCREENINGS/COMPLETED%20SCREENINGS/2005/05UN121-Nunavut%20Airports%20Division%20-%20Iqaluit/01-APPLICATION/060307-05UN121-GN-EBA%20Specifications-ITAE/EBA02704.doc

Date added: November 25, 2013 - Views: 3

doc
03/2002 - Pavers - Patios | Hardscaping | EP Henry - EP Henry

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils [Last Update: 00] 12. ASTM D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method [Last Update: 86 (2001)]

http://www.ephenry.com/download-file.ashx?url=%2fmedia%2fhow-tos%2fCoventry+Wall+Plus+Specification.doc

Date added: May 4, 2013 - Views: 11

doc
www.mass.gov

Pl is the plasticity index, ASTM D4318-93. w is the moisture content in percent, ASTM. D2216-92. Figures 9.4.1.1(a) through 9.4.1.1(j) These figures are not included. Refer to. IBC 2003 Figures 1608.2, 1609, and 1615(1)&(2) Table 1604.10 of the Massachusetts State.

http://www.mass.gov/eopss/docs/dps/inf/code-change-1600-wind-snow-seismic-loads.doc

Date added: April 24, 2012 - Views: 10

doc
CONLOCK II CELLULAR INTERLOCKING CONCRETE GRID

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of. Soils. ASTM D4491 Standard Test Method for Water Permeability of Geotextiles by the . Permittivity Method

http://www.nicolock.com/products/walls/wall-systems/trinity/item/download/77

Date added: July 10, 2013 - Views: 6

doc
Preliminary recommended Standard Tests for Pavement ...

Liquid Limit of Soils (AASHTO T89, ASTM D4318, BS 1377: Part 2) Plastic Limit and Plasticity of Soils (AASHTO T90, ASTM D4318, BS 1377: Part 2) Moisture-Density Relations of Soils (AASHTO T99 & T180, BS 1377: Part 4) There is no direct ASTM equivalent to this test.

http://transportpiu.am/Bent%20Larsen%20lriv%2014.06.10%20franc/Standard%20Tests%20for%20Pavement%20Materials%20in%20Armenia.doc

Date added: March 6, 2012 - Views: 107

doc
Keystone Compac.WORD - York Building Products

ASTM D4318 Liquid Limit, Plastic Limit and Plasticity Index of Soils. 8. ASTM D4475 Horizontal Shear Strength of Pultruded Reinforced Plastic Rods. 9. ASTM D4476 Flexural Properties of Fiber Reinforced Pultruded Plastic Rods. 10.

http://www.yorkbuilding.com/wp-content/uploads/Compac-III-Specs.doc

Date added: May 21, 2013 - Views: 9

doc
excavtg, backflg & compctng for struct - FSD Home

Plastic Index shall be not more than 30 per ASTM D4318, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. 2. Minimum laboratory dry weight at optimum moisture content of 110 lbs/CF. 3.

http://www.laschools.org/fcs/cc/lausd-bidding/download/specifications_-_divisions_02_-_16/specifications_-_division_02/02320_ExcavatingBackfillingandCompactingforSyntheticTurfFields(08-04-07).doc?version_id=5494265

Date added: February 2, 2013 - Views: 3

doc
Geotechnical Guidelines Word Document - Kentucky

(ASTM D4318) 2 per distinct soil unit. Use for soil classification. Grain Size Analysis/Soil Classification (ASTM D422, D1140, D2487) 2 per distinct soil unit Use to estimate soil strength and permeability . Use for piping analysis.

http://water.ky.gov/damsafety/Documents/WRGeotech_Guidelines.doc

Date added: February 5, 2012 - Views: 18

doc
GUIDE SECTION 02200; ALTERNATIVE 2 (For sewer and pipeline ...

The plasticity index of the material, as determined in accordance with ASTM D4318, shall not exceed 15. D. TYPE D: Type D material shall be used for prepared subgrade under slabs and mat-type foundations.

http://virtual.cocef.org/Discos_documentos_consultores/Disco_372/02200_A2.doc

Date added: April 2, 2014 - Views: 1

doc
CONLOCK II CELLULAR INTERLOCKING CONCRETE GRID

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D4491 Standard Test Method for Water Permeability of Geotextiles by the Permittivity Method

http://www.martinlimestone.com/images/images9021/tech%20specs/Eng%20Wall-%20CSI%20Specs.doc

Date added: July 1, 2013 - Views: 2

doc
www.belgarddesignpro.com

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D4491 Standard Test Method for Water Permeability of Geotextiles by the Permittivity Method

http://www.belgarddesignpro.com/docs/BARWTech.doc

Date added: May 23, 2013 - Views: 19

doc
Precast Modular Block Retaining Wall Specification

ASTM D4318 – Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D4767- Test Method for Consolidated-Undrained Triaxial Compression Test for Cohesive Soils. ASTM D4972 – Standard Test Method for pH of Soils.

http://www.redi-rock.com/documents/PMBguide/PMB_Guide_Specification_080113.doc

Date added: August 17, 2013 - Views: 38

doc
www.soilretention.com

Plasticity Index (PI) < 20 and Liquid Limit < 40 per ASTM D4318. B. The maximum aggregate size shall be limited to 3/4 inch (19 mm) unless field tests have been performed to evaluate potential strength reductions to the geosynthetic design due to damage during construction.

http://www.soilretention.com/downloads/VERDURA-SPEC.doc

Date added: November 3, 2011 - Views: 17

doc
ΕΘΝΙΚΟ ΣΥΣΤΗΜΑ ΔΙΑΠΙΣΤΕΥΣΗΣ

... concrete test specimens in the field ASTM C31-10 Soil Liquid limit, plastic limit, and plasticity index of soils ASTM D4318-10 Particle size analysis of soils ASTM D422-07 Mechanical tests ...

http://www.esyd.gr/eped/1.21339_en.doc

Date added: November 25, 2011 - Views: 40

doc
TABLE OF CONTENTS - Ohio EPA Home

ASTM, Standard D4318-10. Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index for Soils. ASTM International, West Conshohocken, Pennsylvania. ASTM Standard D4643-08 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating.

http://www.epa.ohio.gov/portals/28/documents/TGM-03_draft2012.docx

Date added: May 20, 2012 - Views: 45

doc
Granular Sub Base - Newfoundland and Labrador

Liquid limit: to ASTM D4318, maximum 25. Plasticity index: to ASTM D4318, maximum 6 . EXECUTION. PLACING. Place granular sub base after subgrade is inspected and approved by Owner’s Representative. Construct granular sub base to depth and grade in areas indicated.

http://www.tw.gov.nl.ca/works/masterspec/32111601.doc

Date added: October 3, 2011 - Views: 31

doc
Excavating, Trenching and Backfilling - Newfoundland and Labrador

ASTM D4318, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. Canadian General Standards Board (CGSB). CAN/CGSB-8.1, Sieves, Testing, Woven Wire, Inch Series. CA/CGSB-8.2, Sieves, Testing, Woven Wire, Metric.

http://www.tw.gov.nl.ca/works/masterspec/31233301.doc

Date added: October 16, 2011 - Views: 17

doc
Microsoft Word - RECAP 2003 FAQs Jan 01.doc

Undisturbed soil samples should be collected in accordance with ASTM Method D1587 using thin-walled, ... PL, PI) (ASTM D4318) . • Particle Size Analysis (ASTM D422) . • Hydraulic Conductivity1 (Constant Head) (Granular soils) (ASTM D2434)

http://www.deq.louisiana.gov/portal/Portals/0/RemediationServices/RPform_5340.doc

Date added: November 6, 2012 - Views: 14

doc
CONSTRUCTION MATERIALS FIELD OF TESTING

D4318* Liquid Limit, ... ASTM E494 Measuring Ultrasonic Velocity in Materials ASTM E709 Magnetic Particle Examination. L:\Forms\F208 – Scope of Accreditation Selection List: Construction Materials Testing Laboratories (2/1/2007) ...

http://xa.yimg.com/kq/groups/23711357/461503449/name/ASTM

Date added: May 2, 2013 - Views: 76

doc
1 - Missouri Department of Natural Resources

Atterburg Limits (ASTM D4318) Total Organic Carbon ( ASTM D2974) Soil pH (USEPA Method 9045C) Geotechnical and geochemical information will allow for a more site-specific assessment of migration potential.

http://www.dnr.mo.gov/env/hwp/news/riwp-slop-final-01-2005.doc

Date added: October 22, 2011 - Views: 23

doc
REQUEST FOR PROPOSALS - Virginia

Atterberg limits ASTM D4318. Shrinkage factors of soils ASTM D427. Natural density and moisture content AASHTO T233. Aggregate sieve analysis ASTM C136. Standard Proctor test ASTM D698. Modified Proctor test ASTM D1557. California ...

http://www.dgs.virginia.gov/LinkClick.aspx?fileticket=S71MNcbHMxY%3d&tabid=392

Date added: May 16, 2013 - Views: 15

doc
SECTION 1 - TABLE OF CONTENTS - Civil Engineering Blog

Liquid Limit and Plastic Limit - AASHTO T 90 (ASTM D4318) Direct Shear Test - AASHTO T 238 (ASTM D 3080) Unconfined Compression Test - AASHTO T 208 (ASTM D 2166) Unconsolidated-Undrained Triaxial Test - ASTM D 2850.

http://iphala.files.wordpress.com/2011/01/chaper-2-page-1-75.doc

Date added: November 10, 2012 - Views: 53

doc
www.lwua.gov.ph

Atterberg Limit per ASTM D4318 3. Natural Moisture Content per ASTM D2216 4. Soil Classification per ASTM D2487. 1.02 LOCATION OF THE SITES. The approximate location of the work sites requiring geotechnical investigation are shown on the Location Plan.

http://www.lwua.gov.ph/bids_10/Request%20for%20Quotation%20Geotechnical%20%20Investigatioan%20May%2014%20Final.doc

Date added: November 3, 2012 - Views: 5

doc
River Mile 10.9 Removal Action Pre-Final Design Report, Lower ...

7-3Sand Gradation (Modified ASTM C33 Fine Aggregate) 7-4Geotextile Properties and Applicable Standards. 7-5Material Quantities. 8-1RM 10.9 Composite Samples Waste Characterization Profile . Figures. 1-1Lower Passaic River and RM 10.9 Study Areas. 1-2.

http://passaic.sharepointspace.com/Public%20Documents/LPR_RM10%209_PreFinal_Design_11302012.docx

Date added: February 10, 2013 - Views: 18

doc
CHAPTER 31F [FOR SLC] - California State Lands Commission

3.The plasticity index, PI, and the moisture content shall be determined in accordance with ASTM D4318 [6.1] and ASTM D2216 [6.2], respectively. (see Table 31F- 6-1).

http://www.slc.ca.gov/Division_Pages/MFD/MOTEMS/CHAPTER%2031F%20MOTEMS.doc

Date added: October 30, 2011 - Views: 91

doc
** WARNING ** WARNING ** WARNING ** WARNING **

This document is intended for informational purposes only. Users are cautioned that Caltrans does not assume any liability or responsibility based on these electronic files or for any defective or incomplete copying, exerpting, scanning, faxing or downloading of the contract documents.

http://www.dot.ca.gov/hq/esc/tollbridge/Ben-Mar/006034/Specials/04-006034sp.doc

Date added: June 18, 2012 - Views: 82

doc
Download - Home - The American Concrete Institute SoCal Chapter

T90 / D4318 Determining the Plastic Limit and Plasticity Index of Soils. ... Experience and knowledge of concrete testing of the previously mentioned ASTM/AASHTO procedures is highly recommended. For more information regarding this program, please contact . Heather Caya at 1-(877) 562-2241 .

http://www.acisocal.org/app/download/7236903689/AGG+BASE+Flyer+2014.doc

Date added: January 4, 2014 - Views: 4

doc
LOUISIANA MOTOR FUELS - Louisiana Department of Environmental ...

Organic matter (ASTM D2974) $40.00 Unified Soil Classification System (ASTM D2487) $40.00. Atterberg Limits (LL, PL, PI) (ASTM D4318) $50.00. Particle Size Analysis – Sieve (ASTM 422) $50.00. Particle Size Analysis – Hydrometer (ASTM 422) $95.00.

http://www.deq.louisiana.gov/portal/Portals/0/UndergroundStorageTank/2007%20Guidance%20Document.doc

Date added: May 7, 2013 - Views: 7

doc
Scope - American Petroleum Institute

N Standard penetration resistance, ASTM D1536-84. Average field standard penetration test for the top 30m (100 ft)). ... PI Plasticity index, ASTM D4318-93. PAB Anchor design load, N (lbf) PA’ Anchorage attachment design load, N ...

http://mycommittees.api.org/standards/cre/scast/Meeting%20Materials/spring05/ballot16-05-650-598.doc

Date added: October 23, 2013 - Views: 11

doc
2004 - RCU > Home

D422-63(2002) e1 Standard Test Method for Particle-Size Analysis of Soils, ASTM International. D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, ASTM International.

http://www.rcu.msstate.edu/Portals/1/Documents/Public/CUR/Curriculum/Postsecondary/Trades_Industrial/[P]_Civil_Engineering_Technology_[2011].doc

Date added: December 8, 2013 - Views: 25

doc
1 - Public Utilities Board

DRAINAGE DEPARTMENT. INDEX TO STANDARD SEPCIFICATION FOR DRAINAGE WORK. Clause Page. PART I - GENERAL. 1 General Description … … … … … 1

http://www.pub.gov.sg/general/Documents/std_spec.doc

Date added: September 13, 2011 - Views: 44

doc
1 - Government of Alberta Ministry of Transportation:

.4 ASTM D4318 Standard Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils..3 California Division of Highways.1 CAL. 206 Test Method for Specific Gravity and Absorption of Coarse Aggregate.

http://www.transportation.alberta.ca/Content/docType125/Production/02330Earthwork_Materials.doc

Date added: May 11, 2012 - Views: 14

doc
D4-86(2010) Standard Test Method for Bitumen Content

Standard Test Method for Bitumen Content. ASTM-D D5-06e1 . Standard Test Method for Penetration of Bituminous Materials. ASTM-D6-95(2006) Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds

http://grip.de/pdf/astm-doc-eng/astm-D.doc

Date added: May 16, 2013 - Views: 377

doc
HARRIS COUNTY

The material passing the No. 40 sieve shall meet the following requirements when tested in accordance with ASTM Method D4318. The liquid limit shall not exceed 35. The plasticity index shall not exceed 10.

http://www.pur.hctx.net/specs/2007/070448.doc

Date added: January 29, 2012 - Views: 5